Cable suspension systems for heat sensitive cable installation C.A.T. Cable suspension systems come in many types and forms and are used primarily by installers of systems within petrochemical plants, oil storage, road tunnels, conveyers systems, power stations etc. C.A.T. supplies every type of cable suspension bracket as well as all special and specific products for those types of plants.
C.A.T. Cable Test Oven
Commissioning and routine testing of the linear detection system will be enhanced to the benefit of the end user by site VERIFICATION of calibrated alarm temperature levels. The most accurate method of testing being the employment of a controlled and monitored exposure to high temperature without damage to the heat sensitive cable. The portable 'ONE METRE' OVEN concept of testing, allows accessible one metre installed lengths of sensor cable to be subjected to temperatures within the 75°C - 160°C range. Thus confirming correct calibration setting selection and alarm levels in accordance with project specification requirements. Where sensor installation is within Intrinsically Safe classified areas or may be inaccessible for oven use, an additional one metre length may be 'series' wired with existing cable (sensor and/or interconnecting cables) to allow testing to be carried out local to the electronic interface unit. Without adversely affecting system performance levels.
A system which is self contained and adaptable for almost any small to medium sized product designed primarily for small environments such as control rooms, small sea craft, motor homes, rolling stock, recording studio's etc. Can be auto release or manual extinguishing depending on the type of environment from any type of power supply with both visual, audible and remote panel indicators. Many variations available to order.
|
Security Fixings and Products
